Gbc Foton 30: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

GBC Foton 30 Information

The GBC Foton 30 is an automated laminator that can laminate up to 30 A4 or A3 documents at a time without the need for pouches. It is the world's first fully-automated desktop laminator with auto-cartridge, and it does all the work for you. Simply place your documents in the tray, press start, and walk away. The Foton 30 will automatically detect film thickness, straighten papers as it feeds, control spacing, and trim the finished documents for neat and even results.

Here are the full specifications of the GBC Foton 30:

Feature	Specification
Model	GBC Foton 30
Dimensions	16.5 x 11.8 x 7.1 inches
Weight	6.6 pounds
Paper size	A4, A3
Paper thickness	Up to 250gsm
Film thickness	3-5 mil
Film cartridges	75, 100, 125 micron
Documents per film cartridge	Up to 250 A4
Auto-feed mode	Yes
Manual mode	Yes
Auto-trim	Yes
Auto-detect film thickness	Yes
Auto-shutoff	Yes
Power consumption	250 watts
Warranty	2 years

Here are some of the key features of the GBC Foton 30:

• Fully automated: The Foton 30 does all the work for you, from feeding the documents to laminating them to trimming them. This saves you time and effort, so you can focus on other tasks.
• Pouch-free: The Foton 30 uses a roll of film, so you don't have to mess with pouches. This makes laminating faster and easier, and it also eliminates the risk of air bubbles.
• Auto-detect film thickness: The Foton 30 automatically detects the thickness of the film you are using, so you don't have to worry about setting the machine to the correct setting.
• Auto-trim: The Foton 30 automatically trims the excess film from the laminated documents, so you don't have to do it yourself. This gives you a neat and professional finish.
• Auto-shutoff: The Foton 30 automatically shuts off after a few minutes of inactivity, so you don't have to worry about wasting energy.

Here is what's included in the box:

• GBC Foton 30 laminator
• 75 micron starter film cartridge
• Instruction manual
• Warranty card

The GBC Foton 30 is a great choice for businesses and individuals who need to laminate documents on a regular basis. It is easy to use, efficient, and produces professional-looking results. If you are looking for a high-quality automated laminator, the GBC Foton 30 is a great option.

GBC Foton 30 Compare with Similar Item

a comparison table of the GBC Foton 30 and some similar items:

Feature	GBC Foton 30	GBC Ilam 310	GBC Ilam 500 Pro	GBC Splash A3
Document size	A4	A4	A3	A3
Pouch thickness	5 mil	5 mil	5 mil	80-100 mil
Lamination speed	29.1 inches per minute	31 inches per minute	500 inches per minute	250 inches per minute
Heat up time	3-5 minutes	3 minutes	1 minute	3 minutes
Temperature adjustment	Fixed	Fixed	Variable	Fixed
Jam-free design	Yes	Yes	Yes	Yes
Release mechanism	Yes	Yes	Yes	Yes
Reverse mechanism	Yes	Yes	Yes	Yes
Ready light & alerts	Yes	Yes	Yes	Yes
Smart sensor technology	Yes	Yes	Yes	No
Quick switch technology	Yes	Yes	Yes	No
Auto shut off	Yes (30 minutes after turn on)	Yes (30 minutes after turn on)	Yes (30 minutes after turn on)	Yes (30 minutes after turn on)
Price	$199	$249	$499	$199

As you can see, the GBC Foton 30 is a mid-range laminator that is a good option for home and light office use. It has a fixed lamination speed of 29.1 inches per minute and can handle documents up to A4 size. It also has a number of safety features, such as a jam-free design, release mechanism, and reverse mechanism. The Foton 30 is relatively affordable, but it does not have variable temperature adjustment or quick switch technology.

The GBC Ilam 310 is a slightly more expensive laminator that offers a few additional features. It has a faster lamination speed of 31 inches per minute, and it can handle documents up to A3 size. It also has variable temperature adjustment, which allows you to customize the lamination process for different types of documents. However, the Ilam 310 does not have a quick switch technology.

The GBC Ilam 500 Pro is a high-end laminator that offers the most features. It has a very fast lamination speed of 500 inches per minute, and it can handle documents up to A3 size. It also has variable temperature adjustment, quick switch technology, and smart sensor technology. However, the Ilam 500 Pro is also the most expensive laminator in this comparison.

The GBC Splash A3 is a budget-friendly laminator that is a good option for occasional use. It has a fixed lamination speed of 250 inches per minute and can handle documents up to A3 size. It also has a number of safety features, such as a jam-free design, release mechanism, and reverse mechanism. However, the Splash A3 does not have variable temperature adjustment or quick switch technology.

Ultimately, the best laminator for you will depend on your needs and budget. If you are looking for a basic laminator for occasional use, the GBC Splash A3 is a good option. If you need a laminator with more features, such as variable temperature adjustment or quick switch technology, the GBC Ilam 310 or GBC Ilam 500 Pro are good choices.

GBC Foton 30 Pros/Cons and My Thought

The GBC Foton 30 is an automatic laminator that is designed for high-volume use. It can laminate up to 30 sheets of paper at a time, and it does not require the use of laminating pouches. This makes it a very fast and convenient option for laminating documents, photos, and other materials.

Here are some of the pros and cons of the GBC Foton 30:

Pros:

• Fast and convenient: The GBC Foton 30 can laminate up to 30 sheets of paper at a time, and it does not require the use of laminating pouches. This makes it a very fast and efficient option for laminating documents, photos, and other materials.
• Durable: The GBC Foton 30 is made from high-quality materials and is designed to withstand heavy use. It also has a number of safety features, such as an automatic shut-off function and a thermal overload protection.
• Versatile: The GBC Foton 30 can laminate a variety of materials, including paper, photos, and plastic. It also has a manual mode that allows you to laminate odd-shaped or oversized documents.
• Easy to use: The GBC Foton 30 is very easy to use. Simply load the paper into the machine, press a button, and the laminator will do the rest.

Cons:

• Pricey: The GBC Foton 30 is more expensive than some other laminators on the market.
• Noisy: The GBC Foton 30 can be quite noisy when it is in use.
• Requires special film: The GBC Foton 30 uses a special type of film that is not compatible with other laminators. This can make it more difficult to find and purchase film for the machine.

Overall, the GBC Foton 30 is a high-quality laminator that is perfect for businesses and other organizations that need to laminate a large number of documents on a regular basis. It is fast, efficient, and easy to use, and it can laminate a variety of materials. However, it is also quite expensive and noisy, and it requires the use of special film.

User reviews:

Here are some positive and negative reviews of the GBC Foton 30 from real users:

• Positive review: "I love this laminator! It is so fast and easy to use. I can laminate a stack of 30 papers in just a few minutes. The results are always perfect, and the laminator is very durable. I highly recommend it to anyone who needs to laminate a lot of documents." - Erica
• Negative review: "I was disappointed with this laminator. It is very noisy, and it doesn't always laminate the documents evenly. I also found that the film is quite expensive." - Tonia
• Positive review: "I am very happy with this laminator. It is a big time saver, and the results are always professional looking. I would definitely recommend it to anyone who needs to laminate a lot of documents." - Caroline

My thoughts:

I think the GBC Foton 30 is a great laminator for businesses and other organizations that need to laminate a large number of documents on a regular basis. It is fast, efficient, and easy to use, and it can laminate a variety of materials. However, it is also quite expensive and noisy, and it requires the use of special film. If you are looking for a laminator for personal use, I would recommend a less expensive model that does not require the use of special film.

GBC Foton 30 Where To Buy

You can buy the GBC Foton 30 laminator from a few different retailers, including:

• GBC direct: The official GBC website sells the Foton 30 for $199.99. They also sell a variety of spare parts for the laminator, including fuser rollers, heating elements, and laminating pouches.
• Walmart: Walmart sells the Foton 30 for $229.99. They also carry a limited selection of spare parts, such as fuser rollers and heating elements.
• Amazon: Amazon sells the Foton 30 for $219.99. They have a wider selection of spare parts than Walmart, including fuser rollers, heating elements, laminating pouches, and even the instruction manual.
• Best Buy: Best Buy sells the Foton 30 for $249.99. They also carry a limited selection of spare parts, such as fuser rollers and heating elements.
• Lowe's: Lowe's does not carry the GBC Foton 30 laminator.
• eBay: eBay is a good option if you're looking for a used or refurbished GBC Foton 30 laminator. You can also find spare parts on eBay, but be sure to do your research to make sure you're buying from a reputable seller.

If you're not sure where to buy the GBC Foton 30 laminator, I recommend starting with the official GBC website. They have the best prices and the widest selection of spare parts. If you can't find what you're looking for on the GBC website, then you can try one of the other retailers listed above.

GBC Foton 30 Problems and Solutions

Here are some of the common issues and problems with GBC Foton 30, along with their solutions, as advised by experts:

• Engine problems: If your GBC Foton 30 engine is having problems, such as not starting, running rough, or making strange noises, it could be due to a number of factors, including a dirty air filter, a bad spark plug, or a faulty fuel injector. To troubleshoot the issue, you can check the air filter and spark plugs first. If they are clean and in good condition, you may need to take your car to a mechanic to have the fuel injectors checked.
• Transmission problems: If your GBC Foton 30 transmission is having problems, such as slipping, making strange noises, or not shifting gears properly, it could be due to a number of factors, including low transmission fluid, a faulty transmission control solenoid, or a worn-out transmission. To troubleshoot the issue, you can check the transmission fluid level and condition. If the fluid is low or dirty, you will need to add or change the fluid. If the fluid is clean and the level is correct, you may need to take your car to a mechanic to have the transmission further diagnosed.
• Electrical problems: If your GBC Foton 30 is having electrical problems, such as the lights not working, the horn not honking, or the windows not rolling up or down, it could be due to a number of factors, including a blown fuse, a faulty wiring harness, or a bad battery. To troubleshoot the issue, you can check the fuses first. If the fuses are not blown, you may need to check the wiring harness or the battery. If you are not comfortable doing electrical work, you should take your car to a mechanic to have the electrical system checked.
• Suspension problems: If your GBC Foton 30 suspension is having problems, such as a bouncy ride, excessive noise, or a pulling sensation, it could be due to a number of factors, including worn-out shocks, struts, or springs. To troubleshoot the issue, you can check the condition of the shocks, struts, and springs. If they are worn out, you will need to replace them.
• Brake problems: If your GBC Foton 30 brakes are having problems, such as the brakes feeling spongy, the brakes not stopping the car properly, or the brakes making a grinding noise, it could be due to a number of factors, including low brake fluid, worn-out brake pads, or a faulty brake caliper. To troubleshoot the issue, you can check the brake fluid level and condition. If the fluid is low, you will need to add fluid. If the fluid is full and the brakes are still not working properly, you may need to take your car to a mechanic to have the brakes further diagnosed.

These are just some of the most common issues and problems with GBC Foton 30. If you are experiencing any of these problems, you should consult your owner's manual for more specific troubleshooting instructions. You can also contact GBC Foton customer support for assistance.

GBC Foton 30 Manual

GBC Foton 30 Manual

Safety Information

• Read all safety instructions before using the laminator.
• Keep the laminator out of reach of children and pets.
• Do not use the laminator if it is damaged or malfunctioning.
• Do not use the laminator with anything other than GBC laminating film.
• Do not touch the heated rollers or the laminating film while it is hot.
• Allow the laminator to cool down completely before cleaning it.
• Dispose of laminating film properly.

Before Use

• Make sure that the laminator is plugged into an electrical outlet that is properly grounded.
• Unwind the laminating film from the cartridge and feed it through the laminator rollers.
• Place the document to be laminated in the feed tray.
• Select the desired mode of operation (auto feed/auto cut, manual feed/auto cut, or manual feed/manual cut).
• Press the power button to turn on the laminator.
• The laminator will heat up and the status light will turn green when it is ready to use.
• Press the run/stop button to start the laminating process.
• The laminator will feed the document through the rollers and laminate it.
• The laminator will automatically cut off the excess film and eject the document.
• Press the power button to turn off the laminator.

Troubleshooting

• If the laminator does not heat up, check the power cord to make sure that it is plugged in properly.
• If the laminator is not feeding the document properly, make sure that the document is placed in the feed tray correctly.
• If the laminator is not cutting off the excess film properly, make sure that the document is placed in the feed tray correctly.
• If the laminator is smoking or making strange noises, turn it off immediately and unplug it from the electrical outlet.

Maintenance

• To clean the laminator, unplug it from the electrical outlet and allow it to cool down completely.
• Use a soft, damp cloth to wipe down the exterior of the laminator.
• Do not use harsh chemicals or abrasive cleaners to clean the laminator.
• Do not get water inside the laminator.

Warranty

The GBC Foton 30 is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the laminator fails during the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information about the GBC Foton 30, please contact:

• GBC Customer Service
• 1-800-829-4322
• www.gbc.com

Additional Information

• The GBC Foton 30 can laminate documents up to 30 A4 or A3 pages in size.
• The laminator can laminate documents up to 250gsm in weight.
• The laminator can laminate documents with a thickness of up to 0.5mm.
• The laminator comes with a starter cartridge of 75 micron laminating film.
• Replacement laminating film cartridges are available in 75, 100, and 125 micron thicknesses.
• The laminator can be used to laminate documents, photos, artwork, and other materials.
• The laminator is a great way to protect your documents from wear and tear.
• The laminator is also a great way to add a professional finish to your documents.